Light and simple to use, for excavations 1.8 metres to 2.7 metres

Ideal for jobs where a small machine is being used, the excavation can be up to depths of 3 metres in good ground, with the Single Acting Brace System utilising a simple pin and joint connection method to brace the trench or hole.

Consisting of a series of single piece hydraulic legs, the Brace System is very flexible and can be adjusted from 1.8 – 2.7 metres to suit your requirements. The system is easy to assemble and can be installed and disassembled on site. 

Our AA brace system offers a sheet to sheet range of 1.8m – 2.7m and a max permissible load of 38 kN/m.

Get In Touch 

For more information and hire rates for the single acting brace system or any of our other bracing systems range, please contact your nearest depot or call us on 0117 982 8236.

 

TypeSheet to SheetFrame WeightPermissible Load
mkgkN/m
AA1.8m min 2.7m max40038 – 12.8

You may also need