Contact usBristolCardiffLondon
Arrange
site visitDownload
brochure
Telescopic forklift jib attachment mounted on forklift tines

Telescopic Forklift Jib

A heavy-duty fork-mounted extending jib for reaching awkward loads and expanding telehandler reach

  • 3000kg maximum safe working load
  • Extends smoothly from 2.5m to 3.7m
  • Safety swivel hook and shackle included
  • Positive heel pin fork retention
  • Certified for LOLER statutory compliance
  • Rapid nationwide depot delivery service

Our telescopic forklift jib converts standard forklift trucks and site telehandlers into versatile mobile cranes. Fitted in minutes directly over the forks, it provides an adjustable reach from 2.5m to 3.7m to lift, reach, and place awkward loads over site obstacles without putting plant near hazardous edges.

Typical Applications

  • Steel lintel and purlin positioning
  • Trench pump and generator placement
  • Excavation pipe and culvert handling
  • Precast kerb and slab placement
  • Obstructed flatbed vehicle offloading
  • Scaffold gantry material delivery

Machine Mounting and Operation

The jib slides directly over standard forklift or telehandler tines. Two heavy steel heel pins lock behind the fork uprights with linch pins to prevent forward slippage during transit or braking. Operators adjust outreach across stepped pin positions between 2.5m and 3.7m to match the required lift radius. A certified swivel hook and bow shackle are fitted as standard, allowing direct connection to web slings, drop chains, or a standard kerb grab.

Load Ratings and Machine De-Rating

The attachment carries a maximum Safe Working Load of 3000kg in its retracted 2.5m position. However, suspending a load forward shifts the machine's centre of gravity and reduces stability. Contractors must check their telehandler or forklift de-rating chart to determine actual lifting limits at each extension. Site movements with suspended loads should always be made at walking speed on firm, level ground with the boom kept as low as possible.

Statutory LOLER Compliance

Under LOLER 1998 and PUWER 1998, a forklift jib is classified as a lifting attachment. All SEL units are thoroughly examined, LOLER-certified, and supplied with test documentation ready for immediate site use. Jibs are available for short-term hire or purchase from our Bristol, Cardiff, and London depots.

Frequently Asked Questions

What is a telescopic forklift jib attachment?
A telescopic forklift jib attachment is a fork-mounted lifting beam that slides onto the tines of a forklift truck or telehandler, converting the machine into a mobile crane with an extending reach from 2.5m to 3.7m.
What is the maximum lifting capacity of the telescopic forklift jib?
The maximum lifting capacity of the telescopic forklift jib is 3000kg (3.0 tonnes) at minimum outreach, though safe working capacity reduces as the telescopic arm is extended outward and must always be cross-referenced against the host vehicle's de-rated load chart.
How is a telescopic forklift jib secured to a forklift or telehandler?
A telescopic forklift jib is secured to a forklift or telehandler using heavy-duty steel heel pins that pass behind the heel of the forks, physically preventing the attachment from sliding forward off the tines during lifting, transit, or braking.
How does a telescopic jib affect forklift load capacity?
A telescopic jib affects forklift load capacity by projecting the load centre substantially forward, which increases leverage on the steer axle and requires the forklift or telehandler to be de-rated to prevent forward tipping.
What lifting accessories are included with the telescopic forklift jib?
The telescopic forklift jib is supplied complete with a tested safety swivel hook, a certified bow shackle, and heel retention locking pins as standard equipment ready for immediate site deployment.
Do forklift jib attachments require LOLER certification in the UK?
Yes, forklift jib attachments require statutory LOLER certification in the UK as lifting accessories, necessitating an initial thorough examination before use and regular re-examinations every 6 or 12 months in accordance with LOLER 1998 and PUWER regulations.
Can the telescopic forklift jib be used on both forklifts and telehandlers?
Yes, the telescopic forklift jib can be used on both industrial counterbalanced forklift trucks and rough-terrain site telehandlers, provided the fork tine dimensions match the jib's fork pocket profiles and the combined machine capacity is calculated correctly.

Hire or Buy Telescopic Forklift Jibs

SEL supplies telescopic forklift jibs for short-term project hire or long-term purchase across the UK. With fully stocked depots in Bristol, Cardiff, and London, we offer same-day collection or rapid site delivery. Contact our technical hire team today for expert guidance, capacity verification, or a competitive quote.

Technical Specifications

SpecificationValue
Safe Working Load (SWL) - Retracted3,000 kg
Minimum Extension (Retracted Length)2,500 mm
Maximum Extension (Full Outreach)3,700 mm

Note: Lifting capacities at extended positions are subject to host machine load charts and de-rating calculations.

Questions? Talk to SEL about Telescopic Forklift Jib

Our team is responsive, experienced and happy to help.

Essential lifting accessories and companion forklift attachments

We can help with your next project.

Our team is friendly, knowledgeable and ready to consult. We offer no-obligation site visits, fast delivery and competitive rates. Simply fill in the form and we'll be in touch.

You can also give us a call at any time.