Contact usBristolCardiffLondon
Arrange
site visitDownload
brochure

Scaffolding

SEL supplies certified scaffolding equipment for sale and hire nationwide. Our range includes 48.3mm galvanised steel and structural aluminium scaffold tube, BS 2482 timber, composite and steel scaffold boards alongside BS EN 74 drop-forged and pressed fittings. Whether you require bulk materials for site stock, bespoke bracing for Acrow props and needle beams or complete working platforms, we offer rapid delivery of scaffolding nationwide.

Use cases

  • Independent access scaffolding for new builds and renovations
  • Bricklaying, rendering and exterior painting stages
  • Home extension, roofing and gutter access
  • Chimney stack repairs and gable end scaffolding
  • Acrow prop lacing and temporary wall bracing
  • Trench crossings and site pedestrian walkways
  • Perimeter edge protection and guardrail runs
  • Internal ceiling and plastering birdcages
  • Sole plates for prop load distribution
  • Materials loading bays and working platforms

Our Solutions

Need assistance specifying tube lengths, coupler ratings or board configurations? Speak to an SEL specialist for technical and commercial advice.

Case studies

Our Expertise

Our in-house engineering team designs bespoke temporary works schemes combining propping with structural tube bracing. Here are three recent projects showing how our equipment and calculations work on site.

Our engineering team can calculate and detail your temporary works bracing scheme. Get in touch to discuss your project requirements.

Which Scaffolding Configuration Do I Need?

Selecting the right combination of tube material, coupler type and decking boards depends on structural loads, site handling constraints and safety regulations.

ApplicationRecommended SetupKey Benefit
Acrow prop & wall bracingSteel tube & drop-forged double couplersPrevents lateral deflection and increases prop capacity
Residential extensionsSteel tube, double couplers & 1.2m timber boardsStandard compliant access for brickwork and rooflines
Roofline & chimney workSteel tube, swivel couplers & timber boardsWraps easily around gables, valleys and chimney stacks
Internal renovationsLightweight aluminium tube & composite boardsEasy manual handling indoors with non-marking boards
Heavy masonry access4.0mm steel tube & 1.5m heavy-duty timber boardsHigher load capacity for stacked bricks and mortar tubs
Steelwork clampingSteel tube & paired girder clamps (Gravlocks)Clamps scaffolding directly to structural steel flanges

These configurations represent standard industry practice. For bespoke propping calculations or temporary works design to BS 5975, contact SEL.

Complete the system

Scaffolding tube, boards and fittings regularly integrate with our wider temporary works equipment to form complete structural support and site safety packages.

Frequently Asked Questions

What is the difference between tube and fitting scaffolding and modular system scaffolding?
The difference between tube and fitting scaffolding and modular system scaffolding lies in adaptability and connection mechanics. Tube and fitting uses individual 48.3mm tubes joined at any position with loose couplers, providing total geometric flexibility for awkward profiles and propping lacing, whereas modular systems use pre-engineered connection nodes suited to repetitive building elevations.
How does scaffold tube bracing increase the load capacity of temporary props?
Scaffold tube bracing increases the load capacity of temporary props by reducing their effective unbraced buckling length. Clamping horizontal ledgers and diagonal braces across props with drop-forged double couplers provides lateral restraint, which prevents lateral deflection under axial loads and can more than double safe load capacities at full extension.
What safety requirements must be met when using scaffolding in temporary works?
Safety requirements when using scaffolding in temporary works require preventing lateral buckling, ensuring certified slip resistance and stopping fallen materials under the Work at Height Regulations. SEL equipment meets these requirements through certified BS EN 74 drop-forged couplers that lock propping nodes against sway, BS 2482 banded boards that eliminate platform trap ends and dedicated toeboard clips that maintain perimeter edge protection.
When should contractors buy scaffolding equipment outright rather than hire?
Contractors should buy scaffolding equipment outright when projects run for extended durations or when equipment will be continuously reused across multiple jobs. Outright purchase eliminates cumulative rental fees and builds yard inventory, while hire remains ideal for short-term projects, peak demand periods and schemes requiring specialized temporary works design support.
Can tube and fitting scaffolding clamp directly to structural steelwork?
Tube and fitting scaffolding can clamp directly to structural steelwork using purpose-designed girder clamps, also known as Gravlocks. These drop-forged fittings clamp over universal beam and column flanges and must always be installed in opposing pairs to create a balanced, slip-resistant structural tie capable of resisting both tension and compression loads.
What inspection and handover procedures are required for scaffolding temporary works?
Inspection and handover procedures for scaffolding temporary works require initial inspection and formal certification by a competent person prior to first use. Under the Work at Height Regulations 2005, working scaffolds must be re-inspected every seven days, as well as following severe weather, alteration or any event liable to affect structural stability.
How it works

Buying or Hiring Scaffolding with SEL

1

Enquiry & Quotation

Get in touch with your kit list. We confirm sale or hire preferences and provide a clear quotation within 24 hours.

2

Technical Support*

If your scheme requires bespoke prop lacing or temporary works design, our in-house engineers verify load requirements to BS 5975.

3

Nationwide Delivery

Equipment is picked, bundled and dispatched promptly to site from our regional depots in Bristol, Cardiff and London.

*Supplying your own design or standard access layout? We supply equipment for sale or hire with no design fees attached.

We can help with your next project.

Our team is friendly, knowledgeable and ready to consult. We offer no-obligation site visits, fast delivery and competitive rates. Simply fill in the form and we'll be in touch.

You can also give us a call at any time.